Power On - TP-Link 6935364097752 Installation Manual

Power On

Connect the EAP to a Power over Ethernet (PoE) adapter as
follows:
PoE LAN
Ethernet cable length up to 60m
Step 1:
Connect the Ethernet cable from the EAP to the POE port of the
PoE adapter.
Step 2:
Connect the power cord to the power port on the PoE adapter
and plug it into an electrical outlet.
Step 3:
Connect an Ethernet cable from your LAN device (a computer,
router or switch) to the LAN port on the PoE adapter.
10