Hinkley UNA 56 Instruction Manual page 15

Option 3. Multi Gang Wall Switch Box Installation
Remove the existing wall plate and old switch from the wall
1
outlet box. (Fig. 3)
Connect the black lead wires from the switch in the cradle A
2
to the black wires in the switch box. Hot input wire to one of
the cradle switch leads. Power lead to the fan is connected
to the remaining switch lead. (Fig. 4)
Attach the cradle A to the wall switch box using the supplied
3
hardware.
Attach the multi-gang faceplate (not provided) to the switch
4
set in the wall outlet box. Cradle A of Hinkley switch will fit in
any standard decora face plate.
Remote transmitter will be held in place with built in magnets.
5
Outlet box
Switch
Fig. 3
HIRO Control System
Face plate
Outlet box
Cradle A
Fig. 4
©2023 Hinkley Lighting, Inc.
Face plate
Transmitter
| hinkley.com | 13