Hinkley 72" INDY Instruction Manual
  1. Manuals
  2. Brands
  3. Hinkley Manuals
  4. Fan
  5. 72" INDY
  6. Instruction manual

Hinkley 72" INDY Instruction Manual

Indoor / outdoor fan
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
72" INDY
™
INDOOR / OUTDOOR FAN
DC
WET
CEILING FAN INSTRUCTION MANUAL

Advertisement

Table of Contents
loading

Related Manuals for Hinkley 72" INDY

Summary of Contents for Hinkley 72" INDY

  • Page 1 72" INDY ™ INDOOR / OUTDOOR FAN CEILING FAN INSTRUCTION MANUAL...
  • Page 2 SO WE’RE HERE IF YOU HAVE A QUESTION, NEED SOME HELP OR WANT TO CHAT ABOUT OUR PRODUCTS. SEND SUGGESTIONS OUR WAY TOO—WE’RE ALWAYS LOOKING TO MAKE YOUR EXPERIENCE WITH HINKLEY A POSITIVE ONE. > SERVICE@HINKLEY.COM > 800.HINKLEY > LET’S SEE THAT HINKLEY STYLE @HINKLEY...

  • Page 3: Table Of Contents

    ENERGY GUIDE INSTALLING THE HANGING BRACKET SPECIFICATIONS HANGING THE FAN SMART BY BOND ELECTRICAL CONNECTIONS FINISHING THE INSTALLATION WARNING: Read and follow these instructions carefully and be mindful of all warnings shown throughout. ©2019 Hinkley Lighting, Inc. | hinkley.com |...
  • Page 4 Do not operate the reverse switch while the fan blades are in motion. The fan must be turned off and the blades stopped before reversing the blades direction. | hinkley.com...

  • Page 5: Important Safety Precautions

    These factors must be supplied by the person(s) installing, caring for and operating the unit. TOOLS & MATERIALS REQUIRED • PHILLIPS SCREWDRIVER • FLAT SCREWDRIVER • WRENCH OR PLIERS • WIRE CUTTER • STEPLADDER • WIRING SUPPLIES AS REQUIRED BY ELECTRICAL CODE ©2019 Hinkley Lighting, Inc. | hinkley.com |...

  • Page 6: Unpacking Your Fan

    Bracket Mounting Hardware (wood screws, screws, lock washers, washers, wire nuts), Blade to Blade Arm Screws w/Rubber Washers and Nuts (13), Balance kit NOTE: Design of parts shown above may look slightly different for your specific model of fan. | hinkley.com...

  • Page 7: Preparation

    35 pounds. Attach hanging bracket to outlet box using screws provided with the outlet box. Flat Washer Spring Washer Outlet Box Screw Fig. 1 ©2019 Hinkley Lighting, Inc. | hinkley.com |...

  • Page 8: Hanging The Fan

    Tighten security set screws against downrod using a large flat blade screwdriver to ensure a tight fit against downrod. Downrod Tighten nuts against mounting collar. Security Set Screws Mounting Collar Downrod Pin Cotter Pin Top of Fan Body Fig. 2 | hinkley.com...
  • Page 9 (Fig. 4) Trim Ring Yoke Cover NOTE: 6 feet of lead wire is supplied on the fan for use with Top of longer downrods. Fan Body Fig. 3 Slot Fig. 4 ©2019 Hinkley Lighting, Inc. | hinkley.com |...

  • Page 10: Electrical Connections

    As an additional precaution we Ground (green) suggest to secure the plastic wire connectors to the Black (Motor) White (Neutral) wires with electrical tape. (Connect to ground wire on hanger bracket if no house ground wire exists.) Fig. 2 | hinkley.com...
  • Page 11 Secure the wall switch with the two screws provided. (Fig. 4) Attach the wall plate over the wall switch and secure with the two screws provided. (Fig. 4) Fig. 3 Switch Outlet Box Screws Wall Plate Screws Fig. 4 ©2019 Hinkley Lighting, Inc. | hinkley.com |...

  • Page 12: Finishing The Installation

    Screws Trim Ring WARNING: Make sure the hook on the hanging bracket properly sits in the groove in the hanger ball before attaching the canopy to the bracket by turning the housing until it drops into place. | hinkley.com...
  • Page 13 Use a large flat blade screwdriver for final tightening to fully compress the washers. This will help ensure proper alignment of the blades and noise-free, wobble-free running. Blades Screws Assembly Fig. 2 ©2019 Hinkley Lighting, Inc. | hinkley.com |...

  • Page 14: Installation Of Lower Cover

    Be sure the power is off before installing. Attach the lower cover to the mounting hub by turn the cover clockwise until tight. Turn the power on. Your Hinkley Ceiling Fan is now ready to enjoy! Mounting Hub Lower Cover...

  • Page 15: Operation

    4 = Low Speed Speed settings for warm or cool weather depend on factors such as the room size, ceiling height, number of fans, etc. NOTE: This Fan Does Not Have Reversing Feature or Function. ©2019 Hinkley Lighting, Inc. | hinkley.com |...
  • Page 16 An UPWARD airflow moves warmer air off the ceiling area as shown in Figure 4. This allows you to set your heating unit on a cooler setting without affecting your comfort. SUMMER MODE WINTER MODE (COUNTERCLOCKWISE DIRECTION) (CLOCKWISE DIRECTION) Fig. 4 Fig. 3 | hinkley.com...

  • Page 17: Care And Cleaning

    Do not insert foreign objects between rotating fan blades. 1. Do not connect the fan with a wall mounted variable speed control(s). Remote Control Malfunction. 2. Make sure the dip switches are set correctly. ©2019 Hinkley Lighting, Inc. | hinkley.com |...

  • Page 18: Energy Guide

    SMART BY BOND HINKLEY SMART FAN OPTIONS: In addition to the included wall control, you can control your Hinkley fan through the Bond app. • To use the app, download it for free from the App Store or Google Play.
  • Page 19 HINKLEY IS PROUD TO PROVIDE YOU WITH CEILING FAN PRODUCTS THAT ENHANCE YOUR SPACE WITH COMFORT, PURPOSE AND STYLE. AS A FAMILY COMPANY, WE ARE COMMITTED TO DESIGN, PERFORMANCE AND QUALITY, AND WHAT’S IMPORTANT TO YOU IS PARAMOUNT TO US.
  • Page 20 GLOBAL HEADQUARTERS 33000 Pin Oak Parkway | Avon Lake, Ohio 44012 T (440) 653 5500 | F (440) 653 5555 | hinkley.com...

Table of Contents