Advertisement
Quick Reference Guide of WebEye B106
5.1 Select 'Network Configuration' in the menu and configure.
1. Click 'Ethernet'
button.
3. Set Netmask.
5. Set gateway address. If an
unavailable address is assigned,
a popup message informs to
assign the address properly.
5.2 Select 'Video Configuration' in the menu.
3. Skip this step for the built in
CCD. However by clicking
'B/W', B/W images can be
viewed from the built in CCD.
4. Choose proper type
between NTSC and PAL.
2. Check if IP address
is same as assigned at
Setup program.
4.This button makes WebEye set broadcast
address automatically. It is possible to input
diretly.
6 . Click 'Apply' button.
1. Select 'Video Channel
#0' among 4 channels.
2. Select 'Enable' to
use this channel.
5. Click 'Apply' button.
8
Advertisement
