Advertisement
Quick Reference Guide of WebEye B106
3.2.8 Connecting CCTV monitor with a multiplexer or auto-selector
l If a multiplexer or auto-selector is used, a CCTV monitor will be enough for 6 channels.
l Some multiplexers or auto-selectors don't have DIP switch nor are designated to set
termination. If both WebEye and a multiplexer (or auto-selector) aren't designated to set
termination, both a PC and a monitor will not show video properly. Therefore, if a
multiplexer (or auto-selector) isn't designated to set termination nor has DIP switch,
user should designate WebEye to set termination with DIP switch.
l Connection diagram with multiplexer or auto-selector
PC
Video
signal
flows
through LAN Cable.
Auto-selector /
Multiplexer
Video signal flows through
BNC
Cable.
For
application,
use
a
shape d BNC connector.
this
'T'
21
CCTV Monitor
CCTV Cameras
Advertisement
