Advertisement
Quick Reference Guide of WebEye B106
5. After changing IP address, the
new IP address appears. Click on
the IP address.
4. Click this button to change IP
address. Upon clicking the button,
a new window appears where you
change IP address.
IP Address
IP address is an identification code for computers and devices on a TCP/IP network. Networks using
TCP/IP protocol route messages based on the IP address of the destination. Within a closed network, IP
addresses can be assigned at random as long as each one is unique. However, connecting a private
network to the Internet requires using registered IP addresses to avoid duplicates. IP address can be
acquire d from a network administrator or an Internet service provider.
MAC Address (Media Access Control Address)
MAC address is a hardware identification code that uniquely identifies each node of a network. The
MAC layer interfaces directly with the network media. Consequently, each type of network media
requires a different MAC layer. The M AC address of WebEye is a 12-digit number. A unique MAC
address can be found on the label at the bottom of each WebEye.
1. Select the default IP address of
WebEye (211.53.133.91).
* IP Address and MAC Address *
2. & 6. The selected IP address
appears (211.53.133.91).
3. Enter Admin's
password. Default
password is 'admin'.
7. Click 'Start Configuration' button, to
access WebEye through Internet and
configure administration conditions.
6
Advertisement
