Table of Contents
Advertisement
Connections & Setup
Things to Consider Before Connecting
Components
Protect Components From Power Surges
•
Connect all components before plugging any power cords into the wall outlet.
•
Always turn off the TV and other components before you connect or disconnect any cables.
Position Cables to Avoid Audio Hum or
Interference
•
Insert all cable plugs firmly into their jacks.
•
Place any Audio/Video (A/V) cables to the side(s) of the back panels instead of straight
down the back after connecting components.
•
Try not to coil any twin-lead cables and keep them away from all A/V cables as much as
possible.
•
Make sure all antennas and cables are properly grounded. Refer to the Safety Tips sheet
packed with your unit for detailed information.
Protect Components From Overheating
•
Never block ventilation slots in any component. Arrange the components so that air can
circulate freely.
•
Do not stack components.
•
Allow adequate ventilation when placing components in a stand.
•
Place an amplifier or satellite receiver on the top shelf of a stand so heated air rising from it
will not flow around other components.
6
Chapter 1
Hide quick links:
Advertisement
Table of Contents
