6/10/99 11:28 AM INTRODUCTION The 900 MHz stereo wireless headphone system uses latest wireless technology that enables you to enjoy music and TV sound anywhere inside or outside your home. You can simply connect the system to any sound source such as CD, TV, VCR, Hi-Fi and radio.
Just insert the mini plug on the audio cord into the jack on the adapter to convert the connector for this applica- tion. Then insert the red and white RCA plug ends into the equipment jacks marked “Audio Out” to make the audio source connection (see diagram).
WHP150 MANUAL(1J1500 ) 6/10/99 11:28 AM CHARGING THE BATTERIES 1) Switch the ON/OFF switch on the headphone receiver to OFF. 2) Plug the charge output plug, located on the back of the transmitter, into the charge input jack of the headphone receiver to charge the batteries.
WHP150 MANUAL(1J1500 ) 6/10/99 11:28 AM TROUBLE SHOOTING No Sound Ensure the AC adapter is fully inserted into the AC outlet and into the power connection input on the transmitter. Ensure the headphones ON/OFF switch is in the ON position. Headphone batteries may be too low.
To receive UHF or VHF stations or serve as a backup for cable outages, purchase the RCA ANT200. Switching between your cable or satellite and your antenna is made easy with an integrated A/B switch. Hooks up to any TV and includes all necessary accessories.
WHP150 MANUAL(1J1500 ) 6/10/99 11:28 AM Page 12 ONE YEAR LIMITED WARRANTY Thomson Consumer Electronics, Inc. warrants that for one year from the date of purchase this product is free from defects in material and workmanship. If the item is defective within that period, return it at your expense to the dealer from whom it was purchased together with proof of purchase for replacement.