Tour Of The Remote Control; Component Buttons - RCA RC5220P User Manual

Setup and Connections

Tour of the Remote Control

You can use this remote to control compatible televisions. The TV
button is programmed to operate most PROSCAN, RCA, and GE
televisions. The remote can also operate other brands of televisions,
but you must manually program it to do so (see "Programming the
Remote" on page 86).

Component Buttons

In order for the remote control to operate a television or this DVD
player, you must press the appropriate button to put the remote in the
correct mode.
DVD Press this button to turn on the DVD Player and to set
the remote to control the DVD Player.
TV Press this button to turn on most RCA, GE, or
PROSCAN TVs and set the remote to control the TV.
Used with ON•OFF button to turn on some other
brands of TVs.
If you would like to operate more components from a single remote
control, you can order a Universal Remote Control. The Univeral
Remote allows you to control a TV, the DVD player, two VCRs, a
satellite receiver and an auxillary component such as an Audio/Video
Receiver. To order the Universal Remote Control, see page 89.
The Buttons Might Operate Differently for Other Components
The buttons on this remote control may operate differently for other
components, especially when you're using the menu system of another
component. For example, to select a menu item in your DVD Player's menu you
press the OK button. However, for your television, you may need to press the
MENU or the INFO button on this remote control to select a menu item.
(continued on next page)
14
The component buttons (TV and DVD) are
at the top of the remote control, near the
ON•OFF button.