Table of Contents
Advertisement
Reference
Programming the Remote
The remote can be programmed to control most brands of remote
controllable TVs. The remote is already programmed to control most
RCA, PROSCAN, and GE TVs.
Testing the remote
To determine whether the remote needs to be programmed, turn the
TV ON, point the remote at the TV, and press the TV button. Then
press POWER or CH ^ (channel up) or CH v (channel down) to see if
the TV responds to the remote commands. If not, the remote needs to
be programmed.
Programming the remote
There are two ways to program the remote control: automatic code
search and direct entry.
Using Automatic Code Search
The following instructions can be used to program the remote to
operate your television. If you want to exit the automatic code search
without programming the TV, press CLEAR until the red light on the
remote turns off.
1. Turn on the TV you want to operate.
2. Press and hold the TV button you want to program. While
holding the TV button, press and hold ON•OFF until the red light
on the remote turns on, then release both buttons.
3. Point the remote at the TV. Press and release PLAY, then wait 5
seconds or until the red light on the remote stops flashing.
At this point the remote is searching for the correct code to
program. If, after 5 seconds, the TV you want to operate does not
turn off, press PLAY again to tell the remote to search the next set
of codes.
Continue pressing PLAY until the TV turns off or you have
searched through all of the codes. There are 20 total sets of
codes. If the TV does not turn off after pressing PLAY 20 times,
then the remote cannot be programmed to operate that TV.
If the TV you want to control does turn off:
1. Press and release REVERSE, then wait 2 seconds. Repeat this
step until the TV turns back ON.
2. To finish, press and hold STOP until the red light on the remote
turns off.
86
You'll use these buttons when you
program the remote to operate a
television.
The remote may not operate all models
of all brands.
Red light
Advertisement
Table of Contents
