Dvd/Vcr + Tv - RCA DRC6200N User Manual

TV (BACK PANEL)
DVD/VCR PLAYER
Note: For a more detailed explanation of the jacks on the back of the DVD/VCR, go to page 49.

DVD/VCR + TV

1. Connect a coaxial cable to the Cable/Antenna jack on your TV (sometimes labeled ANT IN) and to the
RF OUT jack on your DVD/VCR.
2. Connect the coaxial cable from your cable outlet, cable box, or antenna to the ANT IN jack on your
DVD/VCR.
3. Connect the audio cables to the AUDIO OUT L (left – white) and R (right – red) jacks on the back of
your DVD/VCR, and to the corresponding Audio Input jacks on your TV (sometimes labeled AUDIO IN
L and R).
4. Connect the video cable.
A. Basic video connection – Connect the video cable (yellow) to the VIDEO OUT jack on the back of
your DVD/VCR, and to the Video Input jack on your TV (sometimes labeled VIDEO IN).
B. S-Video (optional) – If your TV has an S-Video jack, connect an S-Video cable (not provided) to
the S-VIDEO OUT jack on the back of your DVD/VCR and to the S-VIDEO IN jack on your TV. This
connection is only for DVD signal. For the VCR signal, you must also connect the standard video
cable.
C. Component video (optional, connection not pictured) – If your TV has component video jacks (Y,
Pb, Pr), connect component video cables (not provided) to the COMPONENT OUT jacks on the
DVD/VCR for the best picture quality. This connection is only for DVD signal. For the VCR signal,
you must also connect the standard video cable to the VIDEO OUT jack.
5. Connect the AC power cord into an AC outlet.
Chapter 1
S-VIDEO IN COMPONENT VIDEO
Y Pr Pb
4B
DVD
AUDIO OUT
COMPONENT OUT
Y
R
Pr
L
Pb
OPTICAL COAXIAL
Connections and Setup
ANT IN
VIDEO IN AUDIO IN
L R
3
OUT
R
4A
L
S-VIDEO OUT
1
DVD & VCR
IN
ANT. IN
2
AUDIO
RF OUT
VIDEO
CABLE OR
OFF-AIR
SIGNAL
Go to page 9
7