Index Search - RCA DRC6200N User Manual

Index Search

The VCR has a VHS Index Search System that automatically records index marks on the tape every time
you start a recording. During playback you can locate the program you want to play by the number of
index marks or by scanning. The VCR will search forward or reverse from the location you are at on
the tape.
INDEX SEARCH
Press REW or FF
to begin searching
or
Enter a specific
index number
- -
End:
MENU
Chapter 4
To Activate Index Search:
1. While playing back, press the STOP button to stop the
tape.
2. Press the MENU button to display the VCR SETUP MENU.
3. Press the down arrow button until FUNCTIONS is
highlighted, and press OK (the FUNCTIONS menu
appears).
4. Press the down arrow button until Index Search is
highlighted, and press OK (the INDEX SEARCH screen
appears).
5. If you want to search through a certain number of index
marks, press two number buttons to enter the number of
marks you want to search. Press the CLEAR button on
the remote control to correct an entry.
6. Press the FORWARD button to search forward or the
REVERSE button to search in reverse. The VCR will locate
your index mark and begin playback. If you did not enter
a specific index number, the VCR will locate the next
index mark and begin playback.
7. Press STOP to stop Index Search.
Notes: Certain index marks may be missed by the VCR including:
• Marks too close to the current location of the tape.
• Those at the beginning of a recording lasting five minutes
or less.
• Index marks that start at the beginning of the tape.
VCR Features
33