Table of Contents
Advertisement
DVD/VCR + TV
1. Connect a coaxial cable to the Cable/Antenna jack on your TV (sometimes labeled ANT IN) and to
the TV jack on your DVD/VCR player.
2. Connect the coaxial cable from your cable outlet, cable box, or antenna to the ANT IN jack on your
DVD/VCR.
3. Connect the audio cables to the AUDIO OUT L (left – white) and R (right – red) jacks on the back of
your DVD/VCR player, and to the corresponding Audio Input jacks on your TV (sometimes labeled
AUDIO IN L and R).
4. Connect the video cable.
A. Basic video connection – Connect the video cable (yellow) to the VIDEO OUT jack on the back of
your DVD/VCR player, and to the Video Input jack on your TV (sometimes labeled VIDEO IN).
B. S-Video (optional) – If your TV has an S-Video jack, connect an S-Video cable (not provided) to
the S-VIDEO OUT jack on the back of your DVD/VCR player and to the S-VIDEO IN jack on your
TV. This connection is only for DVD signal. For the VCR signal, you must also connect the
standard video cable.
C. Component video (optional, connection not pictured) – If your TV has component video jacks (Y,
Pb, Pr), connect component video cables (not provided) to the COMPONENT OUT jacks on the
DVD/VCR player for the best picture quality. This connection is only for DVD signal. For the VCR
signal, you must also connect the standard video cable.
5. Connect the AC power cord into an AC outlet.
Chapter 1
TV (BACK PANEL)
ANT IN
S-VIDEO IN
DVD/VCR PLAYER
2
ANT. IN
RF OUT
CABLE OR
OFF-AIR
SIGNAL
Note: For a more detailed explanation of the jacks on the back
of the DVD/VCR, go to page 55.
Connections and Setup
COMPONENT VIDEO
AUDIO IN
Y
Pr
Pb
R
L
4B
3 4A
1
VCR IN
DVD/VCR
COMPONENT
AUDIO
LINE1
OUT
VIDEO OUT
OUT
DIGITAL
AUDIO OUT
S-VIDEO OUT
OPTICAL
VIDEO IN
Go to page 9
7
Advertisement
Table of Contents
