Parkside PISG 120 B3 Operation And Safety Notes page 9

Pay attention to the condition
„
of the welding cable, electrode
holder and the earth terminal.
Wear and tear of the insulation
and the live parts can lead to
hazards and reduce the quality
of the welding work.
Arc welding creates sparks,
„
molten metal parts and smoke.
Therefore ensure that: All
flammable substances and/or
materials are removed from the
work station and its immediate
surrounding.
Ensure the work station is
„
ventilated.
Do not weld on containers,
„
vessels or tubes that contain or
contained flammable liquids or
gases.
„
form of direct contact with the
welding current circuit. The
open circuit voltage between
the electrode holder and earth
terminal can be dangerous,
there is a risk of electric shock.
Do not store or use the device
„
in a damp or wet environment
or in the rain. Protection rating
IP21S is applicable in this
case.
Protect your eyes using the
„
appropriate protective glasses
(DIN level 9-10), which are fas-
tened to the supplied welding
Avoid any
mask. Wear gloves and dry
protective clothing that are free
of oil and grease to protect the
skin from exposure to ultravio-
let radiation of the arc.
„
the welding power source to
defrost pipes.
Please note:
The light radiation emitted by
„
the electric arc can damage
eyes and cause burns to the
skin.
Arc welding creates sparks
„
and drops of melted metal.
The welded workpiece starts to
glow and remains hot for a rel-
atively long period. Therefore,
do not touch the workpiece
with bare hands.
Arc welding can cause
„
vapours to be release that
may be hazardous to health.
Be careful not to inhale these
vapours.
Protect yourself from the
„
harmful effects of the electric
arc and keep people that are
not involved in the work away
from the arc maintaining a
distance of at least 2 m.
ATTENTION!
During the operation of
„
the welding device, other
Safety instructions
Do not use
GB 9