Table of Contents
Advertisement
Install SMV Emblem (Semi-Mounted)
See Figure 32.
1. Remove manual tube and hardware.
2. Align holes of manual tube and SMV mounting
bracket (16) and reattach to deck using previous
hardware.
1. Tailwheel
2. Lower hitch pin
3. Drive
4. Spring arm
5. Spring
6. Transport lock-up
7. 3-1/2 x 8 Hydraulic cylinder
8. 1/2 to 1/4 Reducer
9. 1/4 x 1/4 90° Elbow w/ 1/16
restricter
10. 1/4 x 156" Hose
11. Ratchet adjustment link
(Rev. 7/16/2012)
MAN0571 (Rev. 6/15/2007)
12. 1 x 4-1/2 Headless pin
13. 1 x 5 Headless pin
14. 1 x 2.72 Headless pin
15. 1-1/4 Stroke control kit
16. SMV Mounting bracket
17. SMV Socket
18. SMV Bracket
19. Slow moving vehicle emblem
20. 5/8 NC x 5 HHCS GR5
21. 5/8 NC Lock nut
22. 7/16 x 2 Klik pin
23. 1/2 NC x 3 HHCS
Figure 32. DS1260 & DS1440 Semi-Mounted Cutter Assembly
3. Attach SMV socket (17) with two carriage bolts (28)
and lock nuts (29).
4. Attach SMV emblem (19) to SMV bracket (18)
using two round head cap screws (30) and hex
nuts (31).
5. Insert SMV bracket (18) and emblem (19) into
socket (17).
24. 1/2 NC Lock nut
25. 1/4 x 1-1/2 Cotter pin
26. 1/2 NC x 5 HHCSGR5
27. 1/2 NC Flange lock nut
28. 5/16 NC x 3/4 Carriage bolt
29. 5/16 NC Flange lock nut
30. 1/4 NC x 1/2 Round head
screw
31. 1/4 NC Nut
Assembly 45
Advertisement
Table of Contents
