Woods DS12.50 Operator's Manual page 13

SAFETY & INSTRUCTIONAL DECALS
ATTENTION! BECOME ALERT! YOUR SAFETY IS INVOLVED!
10 - PN 1002940 AMBER FRONT REFLECTOR 9"
11 - PN 57123 RED REAR REFLECTOR 9"
13 - PN 1004991
1004991
14 - PN W19924
17 - PN 15502
WARNING
ROTATING COMPONENTS
Do not operate without cover in place.
Look and listen for rotation. Do not
open cover until all components have
stopped.
CONTACT WITH ROTATING PARTS
CAN CAUSE SERIOUS INJURY.
MAN0571 (Rev. 6/15//2007)
Replace Immediately If Damaged!
WARNING
RAISED CUTTER CAN DROP AND CRUSH
Cutte ers must be equipped with transport lock.
stan ds.
All tr ransport components must be functional, kept in good
Bloc Blocking up prevents cutter dropping from hydraulic leak down,
hydraulic system failures, or mechanical component failures.
FAILURE TO FOLLOW INSTRUCTIONS CAN
RESULT IN SERIOUS INJURY OR DEATH.
15502--B
If shaft connection is visible, shield
is missing. Replace shield before
12 - PN 1004114
operating equipment.
15a - PN 57840
540 RPM
-OR-
15b - PN 57841
1000 RPM
DANG NGER ER
1004114
TRANSPORT LOCK
AND CYLINDER
REQUIREMENTS
SINGLE-ACTING FULL
EXTENSION
TRANSPORT
LOCK
16 - PN 33347
DAN ER
UARD MISSIN .
DO NOT OPERATE.
DAN ER
UARD MISSIN .
DO NOT OPERATE.
33347E
DAN ER
18 - PN 24611
SLOW MOVING
VEHICLE EMBLEM
Safety 13