Table of Contents
Advertisement
GB
Problem
Problem
Too much fog of
coating material
(Overspray)
14. Technical Data
Max. viscosity
Power source
Power consumption
Protection Class
Max. ow rate
Sound pressure level*
Sound pressure output*
Oscillation level*
Weight
* Measured in accordance with EN 50580:2014
Information about the oscillation level
The speci ed oscillation level has been measured according to a standard test
procedure and can be used to compare against electric tools.
The oscillation level is also for determining an initial assessment of the vibrational strain.
Attention! The vibration emission value can di er from the speci ed value when the
electric tool is actually in use, depending on how the electric tool is being used. It is
necessary to specify safety measures to protect the operating personnel. These measures
are based on an estimated shutdown during the actual conditions of use (all parts of the
operating cycle are taken into consideration here, for example periods when the electric
tool is switched o , and, when it is switched on but running without any load).
15. Environmental protection
The device and all accessories and packaging have to be recycled in an
environmentally friendly manner. Do not dispose of the appliance with
household waste. Support environmental protection by taking the appliance
to a local collection point or obtain information from a specialist retailer.
Leftover paint and solvents may not be emptied into drains, the sewage system
or disposed of as household rubbish. It has to be disposed of separately as
special waste. Please pay special attention to the instructions on the product
packaging.
12
Cause
Cause
•
Distance to the object too large
•
Material volume too large
Technical Data
100 DIN-s
240 V
~
, 50 Hz
365 W
I
150 ml/min
75 dB (A); Uncertainty K = 4 dB
86 dB (A); Uncertainty K = 4 dB
< 2.5 m/s²; Uncertainty K = 1.5 m/s²
1.2 kg
Remedy
Remedy
•
Reduce distance
•
Reduce the material volume
W 125
Advertisement
Table of Contents
