Table of Contents
Advertisement
13 BRAKE SYSTEM
162
–
Check that leaf spring
6
plate
in the brake caliper support are seated correctly.
–
Insert the new brake linings, insert the pin, and mount the
cotter pins.
Info
Always change the brake linings in pairs.
–
Operate the foot brake lever repeatedly until the brake lin-
400419-11
ings are in contact with the brake disc and there is a pressure
point.
–
Add brake fluid to the MAX marking.
Brake fluid DOT 4 (
–
Mount screw cap with membrane.
Info
Clean up overflowed or spilled brake fluid immediately
with water.
5
in the brake caliper and sliding
p. 269)
Advertisement
Table of Contents
