Husqvarna 701 Enduro 2018 Owner's Manual page 155

–
Loosen fittings
–
To adjust the basic position of the foot brake lever to individ-
ual requirements, loosen nut
ingly.
Info
The range of adjustment is limited. The screw must
be screwed into the footrest bracket by at least four
turns.
–
Position foot brake cylinder
has the necessary free travel.
–
Tighten fitting
Guideline
Screw connection,
foot brake cylinder
–
Check the free travel of the foot brake lever. (
–
3
Tighten nut
S02167-10
BRAKE SYSTEM 13
1 2
on foot brake cylinder
3
and turn screw
2
so that the foot brake lever
1
.
M6 10 Nm (7.4 lbf ft)
.
.
4
accord-
p. 151)
153