Names; Ip Video Intercom Adaptor - Aiphone JKW-IP Operation Manual

1-2 Names

IP Video Intercom Adaptor

AIPHONE JKW-IP
STATUS indicator (Orange)
Blinks orange while the system
starts up, and remains lit once
startup is complete.
Indicator operation summary
Indicator
LAN ACT
indicator
(Orange)
STATUS
indicator
(Orange)
POWER
indicator
(Green)
LAN ACT
STATUS
POWER
LAN ACT indicator (Orange)
Lit orange when a L A N is
connected, and blinks while
exchanging information over
the Ethernet.
POWER indicator (Green)
Lit green when the power is on.
Description
•
Normal operation (When connected
Lit
to network)
•
Exchanging information with LAN
Blinking
port
•
Off Network connection abnormality
•
Normal operation
Lit
•
Starting up
•
When the default setting switch is
Blinking
pressed and held for 5 seconds or
more
•
Power is on
Lit
•
Abnormality in communication with
Blinking
master monitor station
•
Power is off
Off
7
POWER switch
Turns the power ON or OFF.
POWER terminal (18V DC)
Connects the power cable.
Master monitor station connection
terminal
Connects to the master monitor station.
Option output terminal
Connects output signals for option units.
Sensor input 4 terminal
Sensor input 3 terminal
Sensor input 2 terminal
Sensor input 1 terminal
Connects to buttons, sensors, etc. for option
units.
LAN port
Connects networking unit such as router.
Default setting switch (within the sticker area)
When pressed for 5 seconds or more, IP Video
Intercom Adaptor settings are returned to their
factory default settings.
MAC Address
(Do not remove.)
Never press the default setting
switch unless it is necessary.
The registered settings will return to
the default (factory) settings.
INTRODUCTION
Back view