Starting Up The Ip Video Intercom Adaptor; Installing The Pc Application; System Requirements - Aiphone JKW-IP Operation Manual

INTRODUCTION

1-4 Starting up the IP Video Intercom Adaptor

Use the following steps to start up the IP Video Intercom Adaptor.
1.
Check that the wires are connected correctly.
2.
Turn on all connected equipment except for the IP Video Intercom Adaptor.
3.
Turn on the POWER switch for the IP Video Intercom Adaptor.
・
The POWER indicator (Green) and the LAN ACT indicator (Orange) light,
and the STATUS indicator (Orange) blinks.
STATUS indicator
(Orange) blinking
MEMO
For more information on the indicators, see "Indicator
operation summary" of "IP Video Intercom Adaptor" in
"Names".
P.7
4.
The STATUS indicator (Orange) changes to lit.
・
The IP Video Intercom Adaptor is now ready for use.
STATUS indicator
(Orange) lit

1-5 Installing the PC Application

Install the PC Application on your computer from the CD supplied with this product.
You may need to be logged on to your computer as the Administrator to install the PC Application.

1-5-1 System Requirements

Your computer must meet the following system requirements to use the PC Application.
Check the Operation Manual supplied with your computer.
OS
PC system
requirements
Protocol
Network bandwidth
Language
Internet Explorer
The PC Application may not run, or may not operate correctly (such as freezes occurring) on a computer with specifications
below the necessary requirements.
Serious damage could be caused if an error occurs during door release.
We recommend using a computer that exceeds the basic system requirements.
Windows XP Home/Professional(SP3),
Windows Vista Ultimate/Home/Business/Enterprise(SP1)/32-bit version/64-bit version
Windows 7 Home Premium/Professional/Enterprise/Ultimate/32-bit version/64-bit version
Processor: 2 GHz or faster
System memory (RAM): 1 GB RAM or more
Hard disk: 10 MB or more (additional space is needed for recording)
Sound card: 8 bit full duplex, Direct Sound compatible
Display: 1024 x 768 or greater
Run-time: Microsoft(R).NET Framework 2.0 or later
Network: 10BASE-T/100BASE-TX Ethernet
TCP/IPv4, UDP/IPv4, SIP, Others
320 k to 8 Mbps (per IP Video Intercom Adaptor)
English, French, Spanish, German, Dutch, Italian, Japanese
Internet Explorer 6.0 or later (with Internet Options SSL 3.0 enabled)
Provisional registration
Provisional registration
12
Registration : Administrator/User
Registration : Administrator/User