Aiphone JKW-IP Operation Manual page 27

3.
Enter the "Connection Port" number, "Audio Port"
number, "Video Port" number, and "Web Port" number.
・
The factory default setting numbers are - Connection Port:
"5060", Audio Port: "65002", Video Port: "65202", and Web
Port: "443".
・
For Global, it may be necessary to change ports when
you are using multiple IP Video Intercom Adaptors or PC
Applications. Please check our homepage at http://www.
aiphone.net for more details.
・
For the broadband router setting information, see the
Operation Manual supplied with the broadband router.
4.
Click [SAVE].
・
"[Network] Setting has been saved." is displayed, and the
Reboot Confirmation dialog is displayed.
MEMO
• Setting operations are canceled if you click [CANCEL], and
you are returned to the Administrator Settings window.
5.
Click [OK].
・
[System is initializing. Please wait. Elapsed Time XX
seconds.] is displayed, and the IP Video Intercom Adaptor is
rebooted. It takes about 100 seconds to reboot.
・
The STATUS indicator blinks. When the STATUS indicator
changes to lit, rebooting is complete.
・
You can also reboot with the [Reboot] button.
MEMO
• All settings are returned to their factory default settings
if you press the IP Video Intercom Adaptor default setting
switch for 5 seconds or more.
Update Encryption Key File, Adaptor Name
Settings, Adaptor Language Settings, Video Setting
Update Encryption Key File
T he door release a nd option out put com ma nds a re
encrypted. In order to improve security, it is recommended
that the Encryption Key File be updated regularly.
1.
Click [UPDATE].
・
The Update Encryption Key File Confirmation dialog is
displayed.
2.
Click [OK].
・
"The encryption key file has been updated." is displayed.
MEMO
After updating the Encryption Key File, it is necessary to re-
•
obtain the Encryption Key and make settings in all the PC
Applications. See "Downloading Encryption Key"
more details.
Adaptor Name Settings
You can change the name of the IP Video Intercom Adaptor.
The "MAC Address" is entered as the default.
1.
Enter the "Adaptor Name".
MEMO
• See P.51 for the characters and symbols that can be used.
• If a name is not set, the MAC Address is used as the Adaptor
Name.
27
IP Video Intercom Adaptor Settings
P.32 for