Table of Contents
Advertisement
Setting the Tone
P
(Treble): Touch the plus (+) or minus (−) sign
next to this symbol to increase or decrease
the treble. Touch the center position to adjust the
setting to the center.
Mid (Mid-range): Touch the plus (+) or minus (−)
sign next to this symbol to increase or decrease
the mid-range. Touch the center position to adjust
the setting to the center.
D
(Bass): Touch the plus (+) or minus (−) sign
next to this symbol to increase or decrease
the bass. Touch the center position to adjust the
setting to the center.
Z
(Speaker): Touch the plus (+) or minus (−)
sign next to this symbol to increase or decrease
the speaker when in surround mode or Center
Point DSP setting is selected. This feature allows
you to increase or decrease the amount of
surround sound. Touch the center position to
adjust the setting to the center.
Adjusting the Speakers
Left/Right (Balance): To adjust the balance
between the right and the left speakers, touch and
hold the Left or Right screen buttons. To center
the balance and the fade, touch the center, where
the two lines meet.
Front/Rear (Fade): To adjust the fade between
the front and the rear speakers, touch and hold the
Front or Rear screen buttons. To center the
balance and the fade, touch the center, where the
two lines meet.
Digital Signal Processing (DSP)
This feature is used to provide a choice of five
different listening experiences. DSP can be used
while listening to the audio system or the
six-disc DVD changer. The type of DSP selected
is displayed on the status line.
You may choose from the following DSP settings:
Center Point: Select this screen button to adjust
the audio to get the best sound quality when
listening to an XM™ audio source or CD/DVD. This
feature creates a multi-channel experience from
CDs containing stereo recordings. This feature is
not available in AM, FM, or WX (weather).
97
Advertisement
Table of Contents
