Table of Contents
Advertisement
To use the phone to connect or pair to the
navigation system:
1. Press the CONFIG hard key.
E
2. Select the
(Bluetooth
3. Select the Receive screen button. Use your
phone's search feature to select the vehicle
from the phone's list of Bluetooth
found.
4. Follow the instructions on the screen of the
phone to connect the phone with the vehicle.
They will differ depending on your phone.
Refer to your phone instructions for further
information.
5. Select default so the vehicle will attempt to
automatically connect to the phone when
you enter the vehicle.
The following options are available when in the
®
Bluetooth
set up screen.
®
) screen button.
®
devices
My Info (Information): Select this screen button
to display the details of your Bluetooth
including the name and passkey information.
Selecting Device Name allows you to edit
the name of the Bluetooth
®
PASS-Key
allows you to edit the pairing
passkey used for your vehicle. The system default
device name is "Cadillac STS" and the
®
PASS-Key
is set to "1234". It is recommended
that you change the default PASS-Key
number that you can easily remember.
®
device
®
device name. Selecting
®
to a
151
Advertisement
Table of Contents
