Table of Contents
Advertisement
6. Select the desired street name with the
correct designation (Dr., Ln., St., etc.) from
the list.
7. If there is more than one city, the system will
display the list of cities that have a street with
that name. Select a city from the list.
8. Enter the house number using the numeric
keypad on the screen and touch the OK
screen button.
A map screen will appear with the destination
marked.
h
9. Select the
(destination) symbol screen
button.
10. Select the Guide screen button.
11. Once you begin driving you will hear an audio
prompt to "Proceed to the highlighted route."
You are now in route guidance mode.
See "Address" under Destination on page 55 for
more information.
Entering a Point of Interest (POI)
To set a destination by entering a Point of Interest
(POI), do the following:
1. Press the power/volume knob to turn the
system on.
2. Insert the DVD map disc. See "Installing the
Map DVD" under Maps on page 18 for more
information.
A notice may appear. Touch the I agree
screen button to proceed.
3. Press the ROUTE hard key. Verify that the
selected Region is correct.
i
4. Press the
(POI) screen button.
5. Enter the specific title of the POI in the name
space (i.e. Washington Monument) using the
alpha keypad on the screen.
6. Select the POI from the list.
7. If there is more than one city, the system will
display the list of cities that have a street with
that name. Select a city from the list or
select the Input Name screen button to input
the city name.
A map screen will appear with the destination
marked.
11
Advertisement
Table of Contents
