Table of Contents
Advertisement
Setting the Region, Entering an
Address and Point of Interest, and
Storing a Home Destination and Preset
Destinations
Before entering an Address, Point of Interest,
Home, or Preset Destination, select the appropriate
region that contains the final destination. Your
vehicle must be stopped to perform this operation.
Setting the Region
To set the region, do the following:
1. Press the power/volume knob to turn the
system on.
2. Insert the DVD map disc. See "Installing the
Map DVD" under Maps on page 18 for more
information.
A notice may appear. Touch the I agree
screen button to proceed.
3. Press the ROUTE hard key.
4. Press the Region screen button.
5. Select the appropriate region numbered screen
button that contains your final destination.
The system will return to the DESTINATION
ENTRY screen. See "Region" under Destination
on page 55 for more information.
10
Entering an Address
To set a destination by entering a street address,
do the following:
1. Press the power/volume knob to turn the
system on.
2. Insert the DVD map disc. See "Installing the
Map DVD" under Maps on page 18 for more
information.
A notice may appear. Touch the I agree
screen button to proceed.
3. Press the ROUTE hard key. Verify that the
selected Region is correct.
C
4. Press the
Address screen button.
5. Enter the street name using the alpha keypad
on the screen.
Do not enter directional information or street
type, and use the space symbol screen
U
button (
) between street or city names.
For example, the street name N. Royal
Oak Rd. should be entered as royal
Use the backspace (
an incorrect character has been entered.
U
oak.
V
) screen button if
Advertisement
Table of Contents
