Panasonic CZ-RTC5A Operating Instructions Manual page 9

Perform the following operations in step 2 on page 8.
 Operation mode
Press ◄.
 Set temperature
Press
. (When the cursor is not
visible)
 Fan speed
Press ►.
 Flap
Press ► 2 times.
 Flap Setting for Each Indoor
Unit
(P.12)
(e.g. Cool, Heat, etc.)
Cursor
Heat
Dry
Cool
Fan
Auto
* *
High
* Depending on the model, either of the
displays appears.
Medium
* Auto: Cannot be selected in Fan
mode.
* Depending on the model, selectable
Low
airfl ow directions may diff er.
Auto
* Auto:
The mode is
automatically
switched to
Cool or Heat to
achieve the set
temperature.
• Cool/Dry : 18 °C to 30 °C
• Heat : 16 °C to 30 °C
• Auto : 17 °C to 27 °C
• : Swing
• Pressing ▲▼
during swing can
stop the fl ap at your
preferred position.
9
(EN)