Table of Contents
Advertisement
Changing The Battery
Handset battery
CAUTION: To reduce the risk of fire or personal injury, use only the Telefield NA
Inc. approved Nickel-metal Hydride (Ni-MH) battery model T-T104 (GP, 2.4V,
550mAh), which is compatible with this unit.
Headset battery
CAUTION: To reduce the risk of fire or personal injury, use only the Telefield NA
Inc. approved Li-Polymer battery Model T-T101 (A.E., 3.7V, 240mAh), which is
compatible with this
1. Make sure the telephone is in standby mode (not in TALK mode) before you replace bat-
tery.
2. Remove the battery compartment door.
3. Disconnect the cord attached to the battery pack and remove the battery pack from the
handset.
4. Insert the new battery pack and connect the cord to the jack inside the battery compart-
ment.
5. Put the battery compartment door back on.
6. Place handset in the base or handset charge cradle to charge. Allow the handset battery
to properly charge (for 14 hours) prior to first use or when you install a new battery pack.
If you do not properly charge the phone, battery performance may be compromised.
Display Messages
The following messages show the status of the phone, provides Caller ID information, or
helps you set up and use your phone.
BLOCKED
blocked from
DELETE ALL?
DELETE?
ENTER NAME
ENTER NUMBER
NEW CALLS
HANDSET NAME Prompt telling you to enter a user name for the handset.
UNAVAILABLE
NO LINE
EMPTY
30
unit.
Indicates the person is calling from a number which is
Prompt asking if you want to erase all records.
Prompt asking if you want to erase the current record.
Prompt telling you to enter a name.
Prompt telling you to enter a telephone number.
Indicates call or calls which have not been reviewed.
The handset is not yet registered or is out of range.
Indicates that the telephone line is not connected.
Indicates there are no CID records in memory.
transmission.
Advertisement
Table of Contents
