Inserting A Pause In The Dialing Sequence; Redial; Reviewing The Redial Numbers; Storing A Redial Record In Phonebook - RCA TC25211 User Manual

Inserting a Pause in the Dialing Sequence

Press the #/Pause button twice to insert a delay in dialing sequence when a pause is
needed to wait for a dial tone (for example, after you dial 9 for an outside line, or to wait
for a computer access tone.) Each pause counts as one digit in the dialing sequence, and is
shown as P in the display.

Redial

1. Press the SPEAKER button, the priority line which set in menu will go off hook if both
lines are available.
OR
Press a Line soft key to select a line, then press SPEAKER button to change to Speaker
phone mode
2. Press the REDIAL button. The redial number list is shown in the display.
3. Use the VOL (- or +) button to select the number, press the dial soft key to dial the
desired number.
NOTE: If the number is longer than 32 digits, only the first 32 digits will be saved in the
redial list.

Reviewing the Redial Numbers

Your phone records up to three previously dialed phone numbers.
1. When the phone is idle, press the REDIAL button.
2. Use the VOL (- or +) button to view the last three previously dialed numbers.
3. While the preferred number is displayed, press the HEADSET, SPEAKER, HANDSET, Dial
soft key, or a Line soft key to dial the phone number.
NOTE: If you do not select a line button, the line is automatically opened and the number is
dialed accordingly.
Storing a Redial Record in Phone Book
1. Make sure the phone is in standby mode (not in talk mode).
2. Press the REDIAL button, then use the VOL (- or +) button to scroll to the desired redial
number.
3. Press the Option soft key, then use the VOL (- or +) button to scroll to Store,press Select
soft key to enter edit mode.
4. Enter name shows in the display. Input a name. Please refer to section "Handset Name"
for name editing method.
NOTE: A name must be input otherwise the record cannot be stored.
5. Press the Save soft key , Enter number shows in the display.
6. Edit the numbers with the dial pad.
7. Press the Save soft key to enter VIP Tone Melody selection.
8. Use the VOL (- or +) button to scroll to the desired melody.
9. Press Select soft keyand a tone will confirm your selection. Repeat steps 2 through 7 to
23