3 TOOLS AND MATERIALS FOR INSTALLATION
3.1 SENSOR MOUNTED WITH BUSHING
For the correct installation of the sensor on the asset, the tools and materials indicated in Figure 3.1 are
required.
(a) WEGscan 100
(b) M4x45 mm screw
(c) Drill bit 5,9 mm or 15/64"
(d) Drilling machine
(e) Hammer
(f) Allen wrench 3 mm
(g) Bushing
Figure 3.1: Tools and materials needed to install the sensor on the motor
|
WEGscan 100
3-1