Advertisement
Quick Links
www.vishay.com
IR Sensor Module for Reflective Sensor, Light Barrier,
3
3
2
2
1
1
20953
20953
DESIGN SUPPORT TOOLS AVAILABLE
3
3
D
D
3 D
3D Models
MECHANICAL DATA
Pinning:
1, 4 = GND, 2 = V
, 3 = OUT
S
ORDERING CODE
Taping:
TSSP770..TT - top view taped
TSSP770..TR - side view taped
PARTS TABLE
38 kHz
Carrier frequency
56 kHz
Package
Pinning
Dimensions (mm)
Mounting
Application
BLOCK DIAGRAM
Input
AMP
PIN
16833_17
Rev. 2.3, 10-Apr-2019
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT
and Fast Proximity Applications
4
4
2
V
S
33 kΩ
3
OUT
Band
Demo-
pass
dulator
1, 4
GND
Vishay Semiconductors
FEATURES
• Up to 2 m for presence and proximity sensing
• Uses modulated bursts of infrared light
• PIN diode and sensor IC in one package
• Low supply current
• Shielding against EMI
• Visible light is suppressed by IR filter
• Insensitive to supply voltage ripple and noise
• Supply voltage: 2.5 V to 5.5 V
• Material
categorization:
compliance please see
DESCRIPTION
The TSSP770.. series are compact infrared detector
modules
for
presence
applications. They provide an active low output in response
to infrared bursts at 940 nm. The frequency of the burst
should correspond to the carrier frequency shown in the
parts table.
This component has not been qualified according to
automotive specifications.
APPLICATIONS
• Reflective sensors for hand dryers, towel or soap
dispensers, water faucets, toilet flush
• Vending machine fall detection
• Security and pet gates
• Person or object vicinity activation
• Fast proximity sensors for toys, robotics, drones, and
other consumer and industrial uses
TSSP77038
TSSP77056
Heimdall
1, 4 = GND, 2 = V
, 3 = OUT
S
6.8 W x 3.0 H x 3.2 D
SMD
Presence sensors, fast proximity sensors
PRESENCE SENSING
Envelope
signal
38 kHz
Out to
μC
1
www.vishay.com/doc?91000
TSSP770..
for
definitions
of
www.vishay.com/doc?99912
and
fast
proximity
sensing
+3 V
IR emitter
+3 V
Document Number: 82470
Advertisement
Related Manuals for Vishay TSSP770 Series
Summary of Contents for Vishay TSSP770 Series
- Page 1 TSSP770.. www.vishay.com Vishay Semiconductors IR Sensor Module for Reflective Sensor, Light Barrier, and Fast Proximity Applications FEATURES • Up to 2 m for presence and proximity sensing • Uses modulated bursts of infrared light • PIN diode and sensor IC in one package •...
-
Page 2: Absolute Maximum Ratings
TSSP770.. www.vishay.com Vishay Semiconductors ABSOLUTE MAXIMUM RATINGS PARAMETER TEST CONDITION SYMBOL VALUE UNIT Supply voltage -0.3 to +6 Supply current Output voltage -0.3 to (V + 0.3) Output current Junction temperature °C Storage temperature range -25 to +85 °C Operating temperature range -25 to +85 °C... -
Page 3: Typical Characteristics
TSSP770.. www.vishay.com Vishay Semiconductors TYPICAL CHARACTERISTICS (T = 25 °C, unless otherwise specified) Optical Test Signal (IR diode TSAL6200, I = 0.4 A, 30 pulses, f = f , t = 10 ms) 10/f is recommended for optimal function Output Signal 16110 λ... - Page 4 The TSSP77056 is also IR Receiver suitable for fast (~ 5 ms) proximity sensor applications for TSSP6P38 ranges between 10 cm and 2 m. Please see application note “Vishay’s TSSP4056 Sensor for Fast Proximity Sensing” (www.vishay.com/doc?82741). Emitter Separation to avoid TSAL6200...
- Page 5 TSSP770.. www.vishay.com Vishay Semiconductors PACKAGE DIMENSIONS in millimeters 6.6 ± 0.1 (3.4) Mold residue Mold residue (0.635) 1.27 (3 x) 0.5 ± 0.1 (4 x) technical drawings 3 x 1.27 = 3.81 according to DIN specifications Marking area (2.2) Tool separation line Not indicated tolerances ±...
- Page 6 TSSP770.. www.vishay.com Vishay Semiconductors VISHAY LEAD (Pb)-FREE REFLOW SOLDER PROFILE Axis Title 10000 max. 260 °C 255 °C 245 °C 240 °C 217 °C 1000 max. 20 s max. 120 s max. 100 s Max. ramp up 3 °C/s Max. ramp down 6 °C/s Max.
- Page 7 TSSP770.. www.vishay.com Vishay Semiconductors TAPING VERSION TSSP..TT DIMENSIONS in millimeters 1.75 Ø 1.5 Ø 1.5 technical drawings Drawing-No.: 9.700-5338.01-4 according to DIN Issue: 4; 12.06.13 specifications Rev. 2.3, 10-Apr-2019 Document Number: 82470 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000...
- Page 8 165° to 180° peel angle with standard bar code labels before transported as finished goods to warehouses. The labels are on each packing unit and contain Vishay Semiconductor GmbH specific data. Rev. 2.3, 10-Apr-2019 Document Number: 82470 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000...
- Page 9 TSSP770.. www.vishay.com Vishay Semiconductors VISHAY SEMICONDUCTORS GmbH STANDARD BAR CODE PRODUCT LABEL (finished goods) PLAIN WRITING ABBREVIATION LENGTH Item-description Item-number Selection-code LOT-/serial-number BATCH Data-code 3 (YWW) Plant-code Quantity Accepted by Packed by Mixed code indicator MIXED CODE Origin xxxxxxx+ Company logo...
-
Page 10: Esd Precaution
Proper storage and handling procedures should be followed to prevent ESD damage to the devices especially when they The Vishay Semiconductors standard bar code labels are are removed from the antistatic shielding bag. Electrostatic printed at final packing areas. The labels are on each sensitive devices warning labels are on the packaging. - Page 11 Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Need help?
Do you have a question about the TSSP770 Series and is the answer not in the manual?
Questions and answers