Table of Contents
Advertisement
5 UTILITY PACKAGE (GX Configurator-AD)
(3) Menu bar
(1) Saving the intelligent function module parameter files
(2) Reading from and writing to PLC operations for the intelligent function module
(3) Checking for the required utility
5 - 11
All manuals and user guides at all-guides.com
(a) File items
With file operation, the intelligent function module parameters for the project
opened by GX Developer can be processed.
[Open file]
: Reads the parameter file.
[Close file]
: Closes the parameter file. If revisions were made, the
[Save file]
: Saves the parameter file.
[Delete file]
: Deletes the parameter file.
[Exit]
: Ends the intelligent function module utility.
(b) Online items
[Monitor/test]
: Starts the monitor/test module selection screen.
[Read from PLC] : Reads the intelligent function module parameters from
[Write to PLC]
: Writes the intelligent function module parameters to the
POINT
Since files cannot be saved using the GX Developer project save operation,
save the files using the module selection screen for intelligent function module
parameter setting described above.
parameters using GX Developer
(a) After the intelligent function module parameters are saved in a file, they
can be read from and written into the PLC.
(b) Set the target PLC CPU using GX Developer [Online]
(c) When the A/D converter module is installed to the remote I/O station, use
"Read from PLC" and "Write to PLC".
Start I/O No. is displayed in the Intelligent function module utility setting
screen, but a " " may be displayed for the model name.
This means that either the required utility is not installed or that the utility
cannot be started from the GX Developer.
Check for the required utility in [Tools] - [Intelligent function utility] - [Utility
list...] in GX Developer, and set it.
dialog box asking whether to save the file appears.
the CPU module.
CPU module.
MELSEC-Q
[Transfer setup].
5 - 11
Advertisement
Table of Contents
Troubleshooting
