Mitsubishi MELSEC-Q Q Series User Manual page 25

3 SPECIFICATIONS
(1) Set within the analog input range and digital output range for each input range.
(2) Do not input an analog input current of more than ± 30 mA. A breakdown may
(3) Set the offset/gain values for the user setting range 1 within a range in which
(4) When an analog value that exceeds the range of the digital output value
3 - 8
All manuals and user guides at all-guides.com
POINT
If these ranges are exceeded, the maximum resolution and accuracy may not
fall within the performance specifications. (Avoid using the dotted line area
shown in Figures 3.3 and 3.4.)
result due to overheating.
the following conditions are satisfied.
{ (Gain value) – (Offset value) } > A
<Value of A>
Normal resolution mode
5.5 mA
entered, the digital output value will be fixed at the maximum or minimum
value.
Normal resolution mode
Analog input range
setting
Minimum
4 to 20 mA
0 to 20 mA
User range setting
High resolution mode
16.0 mA
Maximum
–96
4095
–4096
MELSEC-Q
2 is
High resolution mode
Minimum Maximum
–288 12287
–12288 12287
3 - 8