Operations; Control Panel - Samsung WD9 T4 Series User Manual

Operations

Control panel

01 Cycle Selector
02 Display
03 Temp.
04 Spin
05 Dry Option
06 Delay End
07 Options
36 English
WD95T4046CE_04215J-00_EN.indd 36
02
Turn the dial to select a cycle.
The display shows current cycle information and estimated time
remaining, or an information code when a problem occurs.
Press to change the water temperature for the current cycle.
Press to change the spinning speed for the selected cycle.
• Rinse Hold (No indicator): The final rinse cycle is suspended so
that the laundry remains in the water. To unload the laundry, run
a drain or spin cycle.
• No Spin : The drum does not spin after the final drain cycle.
• Spin Only : To run the Spin Only cycle, press Spin for 3
seconds. When the cycle time and spinning speed appear, press
Spin repeatedly until a desired spinning speed is selected. Then,
press Start/Pause to start the cycle. The spinning time depends
on the selected cycle.
Press this button to select proper drying option.
Delay End lets you set the end time of the current cycle. Based
on your settings, the start time of the cycle will be determined
by the machine's internal logic. For example, this setting is useful
for programming your machine to finish a wash at the time you
normally return home from work.
• Press to choose a preset unit of hours.
Press to select the options. Availability of the options depends on
the cycle.
03 04
05
06
09
08
07
2021/3/4 9:39:12