Samsung WD9 T4 Series User Manual page 26

Installation
NOTE
• After connecting the water hose to the adaptor, pull the water hose down to check if it is
connected properly.
• Use a popular type of water taps. If the tap is square-shaped or too big, remove the
spacer ring before inserting the tap into the adaptor.
26 English
WD95T4046CE_04215J-00_EN.indd 26
C
D
4. Insert the adaptor onto the water tap,
and then tighten the screws while lifting
the adaptor.
5. Turn part (C) in the arrow direction to
tighten it.
6. While pulling down part (D) on the
water hose, connect the water hose to
the adaptor. Then, release part (D). The
hose fits into the adaptor with a clicking
sound.
7. To complete connecting the water hose,
see 2 and 3 on the "Connecting to a
threaded water tap" section.
2021/3/4 9:39:09