Samsung WD9 T4 Series User Manual page 57

Code
1C
AC
FC
0
If any information code keeps appearing on the screen, contact a local Samsung service
centre.
WD95T4046CE_04215J-00_EN.indd 57
The Water Level sensor is not working properly.
• Try power off and restarting the cycle.
• If the information code remains, contact a customer service
centre.
• When the "4C" message appears, the washer do draining for 3
minutes. During this time, the Power button is inoperative.
Check communications between main and sub PBAs.
• Turn the machine off, and restart the cycle.
• If the information code remains, contact a customer service
centre.
The drying fan motor is not working properly.
• Turn the machine off, and restart the cycle.
• If the information code remains, contact a local Samsung
service centre.
The machine does not turn off automatically after the last
spinning process, and the "0" message remains.
• The machine operates normally without running the DRUM
CLEAN cycle. However, it is recommended to run the cycle for
hygienic purposes.
Action
English 57
2021/3/4 9:39:16