2
Close the
front panel
3
Install the:
a
Front bezel
b
Side cover
4
Follow the procedure in
2.5-inch hard drive
Removing the 2.5–inch drive from the drive bracket
1
Follow the procedure in
2
Remove the:
a
Side cover
b
Front bezel
c
2.5-inch hard drive assembly
3
To remove the drive:
a
Pull one side of the drive bracket to disengage the pins on the bracket from the slots on the drive [1].
b Lift the drive out of the drive bracket [2].
c
Remove the drive from the bracket [3].
28
Removing and installing components
door.
After Working Inside Your
Before Working Inside Your
Computer.
Computer.