Table of Contents
Advertisement
Installing the 3.5–inch hard drive into the hard drive bracket
1
To install the hard drive:
a
Align the hard drive to the side of the hard drive bracket, and pull the other end tabs to insert the pins on the bracket into the
hard drive [1].
b Insert the hard drive into the hard drive bracket until it clicks into place [2].
2
Install the:
a
3.5-inch hard drive assembly
b
Front bezel
c
Side cover
3
Follow the procedure in
2.5-inch hard drive assembly
Removing the 2.5–inch hard drive assembly
1
Follow the procedure in
2
Remove the:
a
Side cover
b
Front bezel
3
Open the
front panel
door.
4
To remove the hard drive assembly:
a
Disconnect the hard drive data and power cables from the connectors on the 2.5-inch hard drive [1].
26
Removing and installing components
After working inside your
computer.
Before working inside your
computer.
Advertisement
Table of Contents
