Removing the 3.5-inch hard drive
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.
Prerequisites
1
Remove the
computer
2
Remove the
front
Procedure
1
Place the computer with the side-chassis facing up.
2
Remove the screw (#6-32xL6.35) that secures the hard-drive assembly to the
side-chassis.
3
Disconnect the data cable from the hard drive.
34
computer. After working inside your computer, follow
After working inside your
cover.
bezel.
computer. For more safety best
www.dell.com/
Before