Table of Contents
Advertisement
Quick Links
HYDRAULIC
MOTORCYCLE
& ATV LIFT
37777
These instructions accompanying the product are the original instructions. This document is part of the product, keep
it for the life of the product passing it on to any subsequent holder of the product. Read all these instructions before
assembling, operating or maintaining this product.
This manual has been compiled by Draper Tools describing the purpose for which the product has been designed,
and contains all the necessary information to ensure its correct and safe use. By following all the general safety
instructions contained in this manual, it will ensure both product and operator safety, together with longer life of the
product itself.
All photographs and drawings in this manual are supplied by Draper Tools to help illustrate the operation of the
product.
Whilst every effort has been made to ensure the accuracy of information contained in this manual, the Draper Tools
policy of continuous improvement determines the right to make modifications without prior warning.
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Draper 37777
Summary of Contents for Draper 37777
- Page 1 All photographs and drawings in this manual are supplied by Draper Tools to help illustrate the operation of the product.
-
Page 2: Title Page
Commercial copying, redistribution, hiring or lending is prohibited. No part of this publication may be stored in a retrieval system or transmitted in any other form or means without written permission from Draper Tools Limited. In all cases this copyright notice must remain intact. -
Page 3: Table Of Contents
CONTENTS TABLE OF CONTENTS TITLE PAGE INTRODUCTION ......................2 REVISIONS ........................2 UNDERSTANDING THIS MANUALS SAFETY CONTENT ......... 2 COPYRIGHT © NOTICE ....................2 CONTENTS TABLE OF CONTENTS ....................3 WARRANTY WARRANTY ......................... 4 INTRODUCTION SCOPE ......................... 5 SPECIFICATION ......................5 HANDLING AND STORAGE .................. -
Page 4: Warranty 3.1 Warranty
This warranty applies in lieu of any other warranty expressed or implied and variations of its terms are not authorised. Your Draper warranty is not effective unless you can produce upon request a dated receipt or invoice to verify your proof of purchase within the warranty period. -
Page 5: Introduction
This product is suitable for enthusiasts and tradespersons alike. Any application other than that it was intended for is considered misuse. SPECIFICATION Stock No..........................37777 Part No..........................MC/ATV2B Safe working load ........................680kg Minimum height ........................120mm Maximum height ........................ -
Page 6: Health And Safety Information
HEALTH AND SAFETY INFORMATION GENERAL SAFETY INSTRUCTIONS Warning! Before use, ensure that the motorcycle to be supported has a suitable structure and centre of gravity to accommodate the platform without damaging the motorcycle. DO NOT use if the stand will foul on the exhaust or other vulnerable parts. −... -
Page 7: Technical Description
TECHNICAL DESCRIPTION IDENTIFICATION (10) (1) Lift foot pedal. (6) Hydraulic ram unit. (2) Handle. (7) Lift base. (3) Castor wheels. (8) Lower foot pedal. (4) Safety bar. (9) Rear support feet. (5) Fixed wheels. (10) Safety lock mechanism. – 7 –... -
Page 8: Unpacking And Checking
Lay the contents out and check them against the parts shown below. If any part is damaged or missing, please contact the Draper Help Line (the telephone number appears on the Title page) and do not attempt to use the product. -
Page 9: Assembly & Preparation
ASSEMBLY & PREPARATION FITTING THE HYDRAULIC UNIT & FOOT PEDAL – FIGS.1 – 3 − Attach the hydraulic ram unit (6) to the lift base using the fixings provided. Noting that the unit will only attach in one orientation (FIG.4). (6.1) −... -
Page 10: Operation & Use
OPERATION & USE GENERAL OPERATIONAL PROCEDURE – FIG.5 Warning! Before use, ensure you read, understand and apply the safety instructions before use. Before use, ensure that the motorcycle has a suitable structure and centre of gravity to accommodate the stand without damaging the bike. −... -
Page 11: Maintenance
10. MAINTENANCE 10.1 MAINTENANCE − When the stand is not in use, store it in the lowered position. − Keep the stand clean and wipe off any oil or grease. Lubricate all moving parts with oil. − Before each use check all parts. If any part of the stand is damaged or defective, remove the stand from service and take the necessary action to remedy the problem. -
Page 12: Disposal
11. DISPOSAL 11.1 DISPOSAL – At the end of the machine’s working life, or when it can no longer be repaired, ensure that it is disposed of according to national regulations. – Contact your local authority for details of collection schemes in your area. In all circumstances: •... -
Page 13: Explanation Of Symbols
12. EXPLANATION OF SYMBOLS 12.1 EXPLANATION OF SYMBOLS Read the instruction manual. Maximum safe working load. Wear face mask and safety European safety standards glasses. conformity. Wear ear defenders. UK Conformity Assessed. Do not abandon into the European conformity. environment. Keep out of the reach of children. - Page 14 NOTES – 14 –...
- Page 15 NOTES – 15 –...
- Page 16 ©Published by Draper Tools Limited. No part of this publication may be reproduced, stored in a retrieval system or transmitted in any form or by any means, electronic, mechanical photocopying, recording or otherwise without prior permission in writing from Draper Tools Ltd.
Need help?
Do you have a question about the 37777 and is the answer not in the manual?
Questions and answers