Draper 56177 Instructions

Twin/triple reversible puller

Download this manual

INSTRUCTIONS FOR

Twin/Triple

Reversible Puller

Stock No.56177 Part No.N136

IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY TO ENSURE THE SAFE AND

EFFECTIVE USE OF THIS PRODUCT.

11/2004

GENERAL INFORMATION

This manual has been compiled by Draper Tools and is an integrated part of the product with which it is enclosed and

should be kept with it for future references.

This manual describes the purpose for which the product has been designed and contains all the necessary information

to ensure its correct and safe use. We recommend that this manual is read before any operation or, before performing

any kind of adjustment to the product and prior to any maintenance tasks. By following all the general safety instructions

contained in this manual, it will ensure both product and operator safety, together with longer life of the product itself.

All photographs and drawings in this manual are supplied by Draper Tools to help illustrate the operation of the product.

Whilst every effort has been made to ensure accuracy of information contained in this manual, the Draper Tools policy of

continuous improvement determines the right to make modifications without prior warning.

Need help?

Do you have a question about the 56177 and is the answer not in the manual?

Page 1 11/2004 GENERAL INFORMATION This manual has been compiled by Draper Tools and is an integrated part of the product with which it is enclosed and should be kept with it for future references. This manual describes the purpose for which the product has been designed and contains all the necessary information to ensure its correct and safe use.
Page 2 This guarantee applies in lieu of any other guarantee expressed or implied and variations of its terms are not authorised. Your Draper guarantee is not effective unless you can produce upon request a dated receipt or invoice to verify your proof of purchase within the guarantee period.
Page 3 VERSATILITY Twin long leg. Twin short leg. Triple long leg. Triple short leg. SAFETY - INFORMATION: 6. Hit the striking head of the forcing screw with a soft faced hammer and then re- 1. Application of pressure on the forcing tighten with a spanner or socket.
Page 4 ©Published by Draper Tools Limited. No part of this publication may be reproduced, stored in a retrieval system or transmitted in any form or by any means, electronic, mechanical photocopying, recording or otherwise without prior permission in writing from Draper Tools Ltd.

N136