Setup; Assembling The Grass Bag; Unfolding The Handle - Toro Flex-Force Power System Recycler 21326 Operator's Manual

Setup

Important:
The battery pack is not fully charged when it is purchased. Before using the machine for
the first time, refer to
1

Assembling the Grass Bag

No Parts Required
Procedure
2

Unfolding the Handle

No Parts Required
Procedure
Important:
Remove and discard the protective plastic sheet that covers the motor and any other
plastic or wrapping on the machine.
WARNING
Unfolding the handle improperly can damage the cables, causing an unsafe operating
condition.
• Do not damage the cable(s) when folding or unfolding the handle.
• Ensure that the cable(s) are routed to the outside of the handle.
• If a cable is damaged, contact an Authorized Service Dealer.
Important:
Hold the handle while engaging the handle locks to avoid pinching your hands.
1. Remove the handle knobs (A of
2. Using the holes at the ends of the handle, attach the handle to the machine (B of
3. Move the handle rearward to the operating position (C of
Charging the Battery Pack (page
Figure 3
Figure
16).
g407949
4).
Figure
9
Figure
4).
4).