VM0202H / VM0202HB User Manual
Panel Button Control Commands
The Panel Button Control command allows you to enable or disable the Panel
Button Control for the VM0202H / VM0202HB.
The formula for the Panel Button Control command is as follows:
Command + Control + [Enter]
For example, to enable the front panel pushbutton control, type:
button on [enter]
The following tables show the possible values for the Panel Button
Control command:
Command
Control
Note: Each command string can be separated with a space.
The following tables lists the LED behavior under Panel Button Control
commands:
Behavior
When push any
button
32
button
Panel Button Control command
on
Enable front panel pushbutton control
(default)
off
Disble front panel pushbutton control
Front Panel Pushbuttons
Disabled
LEDs flash twice, then
LEDs light on
Description
Description
Front Panel Pushbuttons
Enabled
LEDs light on and no flash