Table of Contents
Advertisement
VM0202H / VM0202HB User Manual
About this Manual
This User Manual is provided to help you get the most from your VM0202H /
VM0202HB system. It covers all aspects of installation, configuration and
operation. An overview of the information found in the manual is provided
below.
Chapter 1, Introduction, introduces you to the VM0202H / VM0202HB
system. Its purpose, features and benefits are presented, and its front and back
panel components are described.
Chapter 2, Hardware Setup, describes how to set up your VM0202H /
VM0202HB installation and all necessary steps are provided.
Chapter 3, Operation, explains the fundamental concepts involved in
operating the VM0202H / VM0202HB via the front panel pushbuttons, and
remote control.
Chapter 4, RS-232 Operation, provides a complete list of the serial control
protocol commands used when utilizing the RS-232 Serial Port so that an extra
source device can be utilized in the installation.
Chapter 5, The Firmware Upgrade Utility, explains how to download the
VM0202H / VM0202HB's firmware and upgrade the device using the utility.
An Appendix, provides specifications and other technical information
regarding the VM0202H / VM0202HB.
Conventions
This manual uses the following conventions:
Monospaced
[ ]
1.
♦
>
iv
Indicates text that you should key in.
Indicates keys you should press. For example, [Enter] means to
press the Enter key. If keys need to be chorded, they appear
together in the same bracket with a plus sign between them:
[Ctrl+Alt].
Numbered lists represent procedures with sequential steps.
Bullet lists provide information, but do not involve sequential steps.
Indicates selecting the option (on a menu or dialog box, for
example), that comes next. For example, Start
open the Start menu, and then select Run.
Indicates critical information.
>
Run means to
Advertisement
Table of Contents
