Download Print this page

Grohe TEMPESTA 100 26 178 Installation And User Manual page 3

Advertisement

These can result from toilets being flushed or
taps being turned on and off.
When this happens your showering
temperature will be held within a controlled
band, provided that the minimum pressure
required by the shower is maintained (page.4)
If the water pressure falls below the minimum
pressure required, it is likely that the pressure
switch will turn off the power to the heating
elements, resulting in a cold shower.
DO NOT place items such as soap, shampoo
or other such bottles on top of the unit.
Liquid could leak through the joint between the
cover and backplate, and possibly damage the
sealing rubber.
WARNING:
ALL WIRING AND INSTALLATION
MUST BE SUPERVISED BY A
SUITABLY QUALIFIED PERSON.
DO NOT INSTALL THIS SHOWER
WHERE IT MAY BE SUBJECTED TO
FREEZING CONDITIONS.
1
We recommend that the installation is done in
the following sequence.
a. Fixing the shower to the wall
b. Plumbing
c. Electrical connections
a. FIXING THE SHOWER TO THE WALL
1. Position the riser rail at a convenient height
for majority of users (fig.1) and mark its
position (see fig.9 for accessory details).
2. Position the heater so that the showerhead
cannot be immersed in the bath or shower
tray when hanging down.
Choose a flat piece of wall to avoid the
possibility of distorting the backplate thus
making the front cover a poor fit.
3. Adjust the position to get the most
convenient arrangement taking the following
into account.
DO NOT MOUNT THE UNIT IN
THE DIRECT HANDSET SPRAY.
The handset must not be able to come into
contact with used water in the cubicle, bath
or basin. If it can, a vacuum breaker must
be fitted.
4. Fix the riser rail with screws provided (fig.9)
5. Remove the front cover by undoing the
retaining screws at the top and bottom of the
unit and lifting the cover off.
6. Remove the detachable lower section by
undoing the 2 x fixing screws (fig.2).
2
7. Decide the position of the electrical cable
into the unit. Your shower offers the ability to
have the connections on the right side or the
left. (see fig.3).
3

Advertisement

loading

This manual is also suitable for:

Tempesta 100 26 179Tempesta 100 26 221Tempesta 100 26 222