Settings In Automower ® Connect - Husqvarna AUTOMOWER 550H Operator's Manual

For more information about the operating modes
Park and Pause , refer to Operation on page 29 .
3.10.4 Account
In this menu there is an overview of the account settings
and you can log off from the app.
3.10.4.1 To set the unit format
Metric or Imperial .
1. Select the unit format
3.10.5 My mowers
My mowers you can manage all the
When choosing
products paired to your account, as well as add new
ones. If there are several paired products it is possible to
select one of them as Current mower .
To pair a new product to the Automower
1. Select the plus sign (+).
2. Select model.
3. Follow the instructions in the Automower
app to finalize the pairing.
®
3.10.6 Automower Direct
®
Automower Direct uses short-range Bluetooth
communication, and is included in Automower
550H.
®
Automower Direct is useful if the operator has the
®
Automower Connect app and the PIN code, but has
not created a Husqvarna account. Automower
is also useful if the connection with the product is only
temporary.
Husqvarna cannot guarantee the time period or
coverage of the long-range cellular connectivity. There is
therefore a possibility to communicate with the product
®
through Bluetooth if you are in short-range of the
product. You can use Automower
Husqvarna account as long as you have the product PIN
code.
22 - Installation
Note:
valid as long as you are within Bluetooth
you move out of Bluetooth
Automower
connection process again.
3.10.6.1 To start to use Automower
1.
2.
3.
4.
Start,
5.
Note:
long as you are within Bluetooth
3.10.7 Map
The map shows the current position of the product and
the set centerpoint for GeoFence.
3.10.7.1 Map settings
1.
2.
3.
®
Connect app:
4.
5.
®
Connect
3.11 Settings in Automower
The product has factory settings but the settings can be
adapted to each work area.
®
3.11.1 Schedule
®
520H/
®
Direct
In
the product.
The schedule function controls which hours the product
should operate and not operate. When the product is
not operating it is parked in the charging station. The
operating hours and days can be seen in an overview in
the Automower
®
Direct without a
The default schedule setting allows the product to
operate around the clock 7 days a week. This
is normally a suitable setting for a work area
corresponding to the maximum capacity. If the work
area is less than the maximum capacity the schedule
®
The Automower Direct connection is only
®
range, you will loose the
® Direct connection and you must do the
®
Download the Automower
mobile device.
®
Select Automower Direct on the start screen of
®
the Automower Connect app.
®
Start Bluetooth on your mobile device and on the
To do the basic settings on page
product, refer to
21 .
Select the product to pair with in the Automower
Connect app.
Enter the PIN code for the product.
You have access to the menus and functions as
Map in the main menu.
Open
Select the settings symbol.
Enable or disable Movement path .
GeoFence radius .
Enable or disable
Map view or Satellite view .
Select
Schedule you can change the schedule settings for
®
Connect app.
®
range. If
®
Direct
Connect app on your
®
®
short-range.
®
Connect
1457 - 012 - 19.01.2023