Siemens SIMOTICS T-1FW6 Operating Instructions Manual page 29

European Directive 2005/32/EC defining requirements for environmentally friendly
design of electric motors
The SIMOTICS motor series is not subject to Regulation (EC) No. 640/2009 for
implementation of this directive.
European Directive 2009/125/EC defining ecodesign requirements of electric motors
and speed controls
The SIMOTICS motor series is not subject to (EU) Regulation 2019/1781 for implementation
of this directive.
Eurasian conformity
SIMOTICS motors comply with the requirements of the Russia/Belarus/Kazakhstan (EAC)
customs union.
China Compulsory Certification
SIMOTICS motors do not fall within the scope covered by the China Compulsory Certification
(CCC).
CCC negative certification (https://support.industry.siemens.com/cs/de/de/view/109769143)
Underwriters Laboratories
SIMOTICS motors are generally in compliance with UL and cUL as components of motor
applications, and are appropriately listed.
Specifically developed motors and functions are the exceptions in this case. Here, it is crucial
that you carefully observe the content of the quotation and that there is a UL or cUL mark on
the rating plate!
Quality systems
Siemens employs a quality management system that meets the requirements of ISO 9001
and ISO 14001.
Certificates for SIMOTICS motors can be downloaded from the Internet at the following link:
Certificates for SIMOTICS motors
cert)
China RoHS
SIMOTICS motors comply with the China RoHS.
You can find more information at:
China-RoHS (https://support.industry.siemens.com/cs/de/de/view/109738670/en)
UKCA - United Kingdom Conformity Assessed
The SIMOTICS motor series satisfies the conformity requirements for England, Wales and
Scotland.
1FW6 external rotor built-in torque motors
Operating Instructions, 03/2023, A5E49196960B AC
3.1 Technical features and ambient conditions
(https://support.industry.siemens.com/cs/ww/de/ps/13347/
Description
27