Table of Contents
Advertisement
Parameter
Video Length
(only affects
video clips in
Video or Hybrid
modes)
Interval
Settings
(Bold=default)
10S (second)
default, with 60S
to 5S possible
range
10S (second)
default, with a
60M (minute)
to1S (second)
range of settings
available.
(60M-1M are set
in one minute
increments,
59S-1S are set
in one second
increments)
Description
Sets length per captured video clip. Settings
begin with 10 second default when parameter is
first selected. After stepping down to 5S, video
length settings start over at 60S. Note: when
IR LED Control setting is "High" (default), videos at
night are limited to 15 seconds maximum length to
prevent overheating.
Selects the length of time that the camera will
"wait" until it responds to any additional triggers
from the PIR after an animal is first detected and
remains within the sensor's range. During this
user set "ignore triggers" interval, the camera
will not capture photos/videos. This prevents
the card from filling up with too many redundant
images. Settings begin with 10 second default
when parameter is first selected. Setting the
Interval time to 1 second will decrease
battery life. Note: after setting down past "1S",
settings start over at "60M".
21
Advertisement
Table of Contents
