Table of Contents
Advertisement
Parameter
Time Stamp
Set Clock
Field Scan
Settings
(Bold=default)
Off, On
(Set)
On, Off
(After On is
selected): "A"
Start/Stop, "B"
Start/Stop,
Interval
Description
Select "On" if you want the date & time (that the
image was captured) imprinted on every photo/
video, select "Off" for no imprint. Note: the
current temperature, moon phase, and (user set)
camera name will also be imprinted on your still
photos.
Press OK and use the UP/DOWN keys (to
change the setting) and LEFT/RIGHT keys (
to move to the next field) to set the hour (24-hr
format only, "00"=midnight, "12"=noon) and
minute, and then (on the lower row), the year,
month and date.
Turns Field Scan (Time Lapse) recording mode
on/off. When activated, Field Scan forces the
camera to take photos or videos even when it
is not triggered by a nearby live animal, useful
for constant monitoring of an area that might be
far away from the camera. The user can set the
start and stop times for up to two independent
"blocks" of Field Scan recording, as well as
the interval time between each photo/video. To
ensure correct operation, avoid setting overlap-
ping start/stop times for Field Scan A and B.
Please read the "Field Scan 2x..." section of this
manual for details on using this feature. NOTE:
If the "Camera Mode" parameter is set to "Day"
or "Night" operation only, that will take priority
over your Field Scan settings. Set Camera Mode
to "24HR" if you are setting day and night Field
Scan start and/or stop times.
23
Advertisement
Table of Contents
