Table of Contents
Advertisement
Server Network Settings
MENU m →
Network
→
Server Network Settings
Connect to Server
Connect to MagicInfo server.
•
Server Address
/
TLS
/
Port
" If you do use the
TLS
option, the server is configured to use https and data transfer is
encrypted. (Port number: 7002)
" If you don't use the
TLS
option, enter the server IP address and port number. Use 7001 as
the port number. (If you are unable to connect to the server using port number 7001, check
with your server administrator to find the correct port number and then change the port
number.)
" Enter the server IP address and port number. Use 7001 as the port number. (If unable to
connect to the server using port number 7001, check with your server administrator to find
the correct port number and then change the port number.)
" For the MagicInfo Server user guide, visit the following website: http://displaysolutions.
samsung.com → Support → Resources → MagicInfo Web Manual.
MagicInfo Mode
Select the appropriate
MagicInfo Mode
product.
•
Lite
/
Premium
" Supported content types may be limited while
→ ENTER E
depending on the environment where you are using the
MagicInfo Mode
is set to Lite.
Server Access
Allow or deny access to MagicInfo server.
•
Allow
/
Deny
FTP Mode
Specify the FTP operating mode.
•
Active
/
Passive
Proxy Server
Set up your proxy server connection and related functions.
Off
/
On
•
Address
/
Port
/
ID
/
Password
"
Address
/
Port
/
ID
and
Password
are enabled only when
Device Name
MENU m →
Network
→
Device Name
→ ENTER E
Select or enter a device name.
This name can be shown on network device over the network.
•
[Signage] Display1
~
6
/
User Input
Proxy Server
is set to On.
77
Advertisement
Table of Contents
